| Key
Specifications 2510 (Standard Cabin) |
| Length |
26' 0" LOA |
| Beam |
8' 6" max. of hull, 8' 9" max. WOA |
| Water line |
23.25' approx. |
| Depth of keel |
10"
approx. |
| Draft loaded |
1' 10" Approx.
|
| Fuel |
60
gal |
| Water |
30
gal |
| Waste |
9.5
gal |
| Displacement |
4,380
lbs approx. dry wt. (with 60hp outboard) |
| Outboard Power |
(1) 60-115
hp outboard motor recommended |
| Sleeps |
up to 5
adults |
| Cabin headroom |
6' 4" |
| Cabin inside width |
7' 0" approx. |
| Cabin length |
8' 9" (standard cabin) |
| Clearance on trailer with
(mast down) |
11' 9"
approx. |
| Dead rise at entry |
48º approx. (28" aft of bow stem) |
| Dead rise aft of cuddy |
15º approx. |
| Dead rise aft of cabin |
10º approx. |
| Dead rise at transom |
10º approx. |
| Quarter beam buttock angle | 1. 75º approx. |
| Construction - Aluminum alloy |
| Sides |
.19"
5086 aluminum |
| Bottom |
.24"
5086 aluminum |
| Deck |
.16"
and .19" 5052 aluminum |
| Transom |
.50"
5086 aluminum |
| Framing (scantlings) |
.19"
5086 aluminum |
| Cabin |
.16" sides .125"
top 5052 aluminum |
| Misc. extrusions, angles and pipe |
6010
aluminum |
| Outboard Motor Power Recommendations |
| 60-115 HP,
115 HP
max. (to maintain displacement efficiency of hull design) |
The
North Westerner 2510 is specifically designed for power thrust outboards that
have a lower end gear ratio and designed for a 25" deep Transum. |
